Tonggu carbon fiber adhesive substance has a special purpose for sticking carbon fiber sheet materials。 It is widely used for structure fortification。 It is composed of primer，putty fillers，saturating resign，（impregnated thermosetting resins）。It is a set of bi-component epoxy adhesive substance featuring nontoxic，non-pungent odor， environmental protection as well as good construction performance。 　　Tonggu base rubber is a type of bi-component epoxy adhesive substance，featuring low viscidity，high permeability。Using this substance ensures good closure and binding property of concretes。 It can also ensure the transmission of maximum stress between concrete structure and carbon fiber complex。 Therefore， it is especially applicable to concrete base level with relatively low mark and many pores。 　　Tonggu saturating resin is a type of bi-component epoxy adhesive substance， needing no solvent， featuring high strength。 It provides good wetting quality to carbon fiber materials。 The complex substance with adhesive impregnated into carbon fiber reinforced polymer laminate boasts high mechanics and good durability。The saturating resign's good durability。The adhesive's good thixotropy and hanging angle leads to the minimum mobility of materials during vertical surface construction。   　　Mix the primer and its firming agent according to proportion then completely and uniformly stir them。Lay for maturation for 5～10 minutes。Then paint the base level surface with the mixed primer using proper instrument。 Make sure the mixed primer is dye before painting （the water capacity should be lower than 6%） and the rubber is clean。The proper temperature range for using the primer is -5℃～40℃。If the temperature during construction is relatively lower，a little bit more firming agent can be added within the proportion。The amount of primer varies according to the unconsolidated levels of concrete structure。The unconsolidated base level surface requires more than twice painting sometimes before its closure。By contrary， the compact concrete base level surface requires relatively fewer amount of primer。Further more，concrete base level surface with high strength and density requires no primer at all。The steel base level surface also requires no primer。Move into next process after the primer hardens。 　　Choose the saturating resin according to the temperature of construction environment。Choose normal saturating resin when the temperature range is 5℃～40℃。Its portion has small difference during different temperature of construction environment。Choose winter saturating resin for special purpose when the temperature range is -5℃～5℃。When used， the two component should be mixed completely and uniformly。 Lay them for maturation for about 5 minutes。Arrange properly，timely to ensure the saturating resin's wetting quality。The construction instrument and method should make sure that the saturating resin can impregnate into carbon fiber reinforced polymer laminate。And the carbon fiber complex material of them should be even and non-bosomy。Check before the saturating resin is solidified and recover timely。     　　During the primer construction，we should keep the working environment'ventilation and forbidden any open flame。The workers should adopt good preventing and protection measures。Store the primer in an enclosed container。Preserve the container in shadowy environment，avoiding sun light and high temperature。 And the storage time span is one year。 　　During construction， the workers should adopt good preventing and protection measures and prevent the adhesive form dipping into the eyes。Store the saturating resin in an enclosed container。Preserve the container in shadowy environment，avoiding sun light and high temperature。 And the storage time span is one year。